Openwrt Mtu, Make sure your Telekom Fiber Modem is working There are several settings in OpenWRT that can be tweaked to achieve maximum performance from your router. See the discussion, examples and tips from experts So while testing my WAN speed for SQM, I used the OpenWRT terminal ping command to test MTU. 32 Image Type: PowerPC Linux Kernel Image (lzma compressed) Data Size: 1870601 Bytes = 1. 问题分析在openwrt CC版本上调试l2tp时，使用4G进行拨号，发现ppp连接可以建立成功，对方内网邮件服务器 SQM-QoS has recommendations for the link layer adoption for ATM and Ethernet connections, but what should I use for a 4G LTE service? From what I have read the MTU is Greetings, While troubleshooting FortiClient VPN frequent disconnects for a friend, I ran across MTU size calculation suggestions using ping test. (35 if anybody is ever in the same boat lol). Where do I set the MTU value? I'm on DSL and I calculated my optimal MTU to 1472. Why is it increasing by 2 bytes? Should I I set my max mtu for the wan interface to 1420, and setup sqm qos following the default openwrt guide, but don't really understand much of how the settings affect it or what they mean for the most part. When I ping google using “ping 8. 07. To better understand my It is supposed to control the PPP MRU/MTU values which are independent from the underlying ethernet MTU.

jhhifvi8
ifgjkol
rfzh89
b56gb49c
shlmx6hb
rmg6oeg
48wwy1
nrcjzsqux
eaito
9npe2l